Chassis Resistance: Low - F006
Triggered and sent to the CPO in the event an Isolation Monitoring Device trips due to low resistance to the chassis during active charging. This occurs when the measured resistance from V+ or V- to chassis is below 100Ω/V, where V is the output voltage.
In the StatusNotification.req use the info field to provide the measured
resistance value to the chassis at the time of failure. The units shall be kΩ.
Omit if no measurement is available.
EVSE Display Requirements
Display the general Error screen, and note that the CPO has been notified.
If contacting Customer Service, reference error code: F006.
Sample Message
[
2,
"12345",
"StatusNotification",
{
"connectorId": 1,
"errorCode": "OtherError",
"info": "20",
"status": "Faulted",
"timestamp": "2022-06-10T14:51:17Z",
"vendorId": "com.evgo.mrec",
"vendorErrorCode": "F006"
}
]